stream_set_blocking
Here is a working example for loops:
<?php
// Timeout in seconds
$timeout = 5;
$fp = fsockopen("www.server.com", 80, $errno, $errstr, $timeout);
if ($fp) {
fwrite($fp, "GET /file.php HTTP/1.0\r\n");
fwrite($fp, "Host: www.server.com\r\n");
fwrite($fp, "Connection: Close\r\n\r\n");
stream_set_blocking($fp, TRUE);
stream_set_timeout($fp,$timeout);
$info = stream_get_meta_data($fp);
while ((!feof($fp)) && (!$info['timed_out'])) {
$data .= fgets($fp, 4096);
$info = stream_get_meta_data($fp);
ob_flush;
flush();
}
if ($info['timed_out']) {
echo "Connection Timed Out!";
} else {
echo $data;
}
}
?>
stream_set_timeout
(PHP 4 >= 4.3.0, PHP 5)
stream_set_timeout — ストリームにタイムアウトを設定する
説明
bool stream_set_timeout
( resource $stream
, int $seconds
[, int $microseconds
] )
stream にタイムアウトの値を設定します。 この値は、seconds と microseconds の和で表されます。成功した場合に TRUE を、失敗した場合に FALSE を返します。
ストリームがタイムアウトとなった場合は、 stream_get_meta_data() が返す配列のキー 'timed_out' の値が TRUE に設定されます。エラーや警告が発生していなくても 同様になります。
例1 stream_set_timeout() の例
<?php
$fp = fsockopen("www.example.com", 80);
if (!$fp) {
echo "開けません\n";
} else {
fwrite($fp, "GET / HTTP/1.0\r\n\r\n");
stream_set_timeout($fp, 2);
$res = fread($fp, 2000);
$info = stream_get_meta_data($fp);
fclose($fp);
if ($info['timed_out']) {
echo 'Connection timed out!';
} else {
echo $res;
}
}
?>
注意: PHP 4.3 より、この関数は、(潜在的には)どの種類の ストリームに対しても機能するようになりました。 PHP 4.3 では、ソケットベースのストリームが、 唯一この関数でサポートされている種類でしたが、他の拡張モジュール由来の モジュールはこの機能をサポートしているかもしれません。
注意: この関数では、stream_socket_recvfrom() のような 高度な操作はできません。そのかわりに、timeout パラメータを指定して stream_select() を使用してください。
この関数は、以前は set_socket_timeout() 、その後は socket_set_timeout() と呼ばれたこともありましたが、 これらの利用は推奨されません。
fsockopen() と fopen() も参照ください。
add a note
User Contributed Notesstream_set_timeout
Martin Butt - martin at anti_spambutt.cx
12-Mar-2007 07:39
12-Mar-2007 07:39
Dianoga (dianoga7 [at] 3dgo.net)
20-Nov-2006 04:33
20-Nov-2006 04:33
I have found that in order to actually stop the socket from timing out the script, you must call stream_get_meta_data and check for a timeout within the loop reading from the socket.
Example:
<?php
$sock = fsockopen($host, 80, $errno, $errstr, 30);
if(!$sock){
echo "Unable to get server status";
}else{
$out = "GET /server.php HTTP/1.1\r\n";
$out .= "Host: $host\r\n";
$out .= "Connection: Close\r\n\r\n";
fwrite($sock, $out);
stream_set_blocking($fp, FALSE );
stream_set_timeout($sock, $timeout);
$info = stream_get_meta_data($sock);
while (!feof($sock) && !$info['timed_out']) {
$file .= fgets($sock, 4096);
$info = stream_get_meta_data($sock);
}
fclose($sock);
?>
alfi_ at yahoo dot com
01-Aug-2006 06:10
01-Aug-2006 06:10
If you are using fsockopen() to create a connection, first going to write into the stream and then waiting for the reply (e.g. simulating HTTP request with some extra headers), then stream_set_timeout() must be set only after the write - if it is before write, it has no effect on the read timeout :-(
Noticed at least on PHP/4.3.10
rtfm61 at yandex dot ru
25-Feb-2006 12:41
25-Feb-2006 12:41
stream_set_timeout() is not suitable for such files as UNIX-devices (/dev/...), i suggest to use select() instead with desirable timeout value - that works well.
ridera
20-Feb-2005 06:15
20-Feb-2005 06:15
[WHOOPS! sorry had the key point reversed in my text. ]
I have been trying to understand how to use stream_set_timeout when calling a remote http page and put together the following code snippets. The first one is a simple test file "test.php" that is called as an html webpage.
The key I found is the "stream_set_blocking($fp, TRUE )". If "FALSE", then $status['timed_out'] seems to not have any practical effect. "TRUE" [PHP default] works.
Note, I have two timeouts, stream and monitor. I need both in my application.
<?php
echo $html_stuff\n; //the html header, etc.
ob_flush(); //makes it echo immediately
$delay= 20; //tweak this, seconds
$report = "<div>Test started at: " . date("H:i:s") ."</div>\n";
$report .= "<div>Started delay= $delay)</div>\n";
echo($report);
ob_flush();
$i=1;
$start_time= time();
while($i <= 10){
$diff= time()-$start_time;
$msg = $i . " at " . $diff;
echo "$msg<br>\n";
sleep($delay);
$i= $i+1;
} // end while
$report = "Finished\n";
$report .= " </body>\n</html>";
echo($report);
?>
The second code block calls test.php with the usual "fopen()"
<?php
$fp= fopen("http://URL/.../test.php", 'rb');
$query_timeout= 4; //tweek this
$monitor_time_sec= 120; //master timeout
stream_set_blocking($fp, FALSE ); //THIS IS IMPORTANT
stream_set_timeout($fp, $query_timeout);
$status = socket_get_status($fp);
// fetch data from test.php
while (!feof($fp) && !$status['timed_out']) {
$chunk = fread($fp, 10000);
$length = strlen($chunk);
$html_str .= $chunk;
$diff = time() - $start_time;
$tm = $status['timed_out'];
echo "<div>At $diff seconds >> $length bytes read, Status[timed out]: ($tm)</div>";
ob_flush();
if ($diff > $monitor_time_sec) {
$pq_array['monitor_timed_out'] = true;
break;
} //end if
sleep(2);
$status = socket_get_status($fp);
} //end while, fetching data
fclose($fp);
$pq_array['connection_timed_out'] = ($status['timed_out'])? true : false;
print_r($pq_array);
echo $html_str; //or whatever.
?>
I have been trying to understand how to use stream_set_timeout when calling a remote http page and put together the following code snippets. The first one is a simple test file "test.php" that is called as an html webpage.
The key I found is the "stream_set_blocking($fp, TRUE )". If "FALSE", then $status['timed_out'] seems to not have any practical effect. "TRUE" [PHP default] works.
Note, I have two timeouts, stream and monitor. I need both in my application.
<?php
echo $html_stuff\n; //the html header, etc.
ob_flush(); //makes it echo immediately
$delay= 20; //tweak this, seconds
$report = "<div>Test started at: " . date("H:i:s") ."</div>\n";
$report .= "<div>Started delay= $delay)</div>\n";
echo($report);
ob_flush();
$i=1;
$start_time= time();
while($i <= 10){
$diff= time()-$start_time;
$msg = $i . " at " . $diff;
echo "$msg<br>\n";
sleep($delay);
$i= $i+1;
} // end while
$report = "Finished\n";
$report .= " </body>\n</html>";
echo($report);
?>
The second code block calls test.php with the usual "fopen()"
<?php
$fp= fopen("http://URL/.../test.php", 'rb');
$query_timeout= 4; //tweek this
$monitor_time_sec= 120; //master timeout
stream_set_blocking($fp, FALSE ); //THIS IS IMPORTANT
stream_set_timeout($fp, $query_timeout);
$status = socket_get_status($fp);
// fetch data from test.php
while (!feof($fp) && !$status['timed_out']) {
$chunk = fread($fp, 10000);
$length = strlen($chunk);
$html_str .= $chunk;
$diff = time() - $start_time;
$tm = $status['timed_out'];
echo "<div>At $diff seconds >> $length bytes read, Status[timed out]: ($tm)</div>";
ob_flush();
if ($diff > $monitor_time_sec) {
$pq_array['monitor_timed_out'] = true;
break;
} //end if
sleep(2);
$status = socket_get_status($fp);
} //end while, fetching data
fclose($fp);
$pq_array['connection_timed_out'] = ($status['timed_out'])? true : false;
print_r($pq_array);
echo $html_str; //or whatever.
?>
ridera
17-Feb-2005 03:37
17-Feb-2005 03:37
I have found it required to add
"stream_set_blocking($fp, FALSE )"
prior to any fgets(), fread(), etc. to prevent the code from hanging up when remote files are called and the response is slow.